BU0836H Industrial USB Interface Controller

An industrially hardened USB joystick interface box with a Dsub 37 pin connectors to connect buttons, potentiometers, sensors, rotary encoders and switches to a PC or Mac. All inputs are ESD protected.
Build your own industrial simulation system.

Inputs
8 analog inputs with 12-bit (4096 steps) resolution each
12 button / 6 rotary encoder inputs, can be used with an external matrix allowing 36 inputs.
8-way "point-of-view" hat switch input when used with an external matrix.
Dimensions
Length 151mm
Width 86mm
Height 37mm
Recommended Wire Size 24AWG to 20AWG
Mounting slots are 5mm x 20mm on all four corners.
Has an external grounding point.

Connection to PC
The PCB has a standard USB B type connector for connection to PC or Mac. No drivers are required. Plug it in and use straight away.

The pinout is described here: